- Catalog Home
- Performance, Engine & Drivetrain
- Air & Fuel Delivery
- Fuel Pump Electric
Fuel Pump Electric
- Good For 525 hp At The Crank
- Regulator Included
- Ready To Assemble
- Clear High Impact Polycarbonate Sight Glass
- Helical Spur Gears Runs Quieter That Straight Cut Gears
- Marine Grade Motor Protects Against Dust And Water
- Contoured CNC Manifold Enhances Flow
- Fuel Pressure Gauge Port
- OE Quality Viton Seals
- Typical Install Is 2 Hours
- Built In The U.S.A.
- Rated Up To 187 Gallons Per Hour
- Improves Throttle Response And Performance
- Universal Billet Alum. Mounting Bracket Allows Secure Install
- Helical Bronze Spur Gear Pump Design Ensure Quiet Operation
- CNC Machined Manifold Passages Maintain High Flowrate
- Individually Built And Tested
- Made In The USA
- Limited Lifetime Warranty
- Helical Spur Gears Runs Quieter Than Straight Cut Gears
- Marine Grade Motor Protects Against Dust And Water
- Contoured CNC Manifold Enhances Flow
- OE Quality Viton Seals
- Built In The USA
- Billet Aluminum Construction For Durability and Good Looks
- 10AN O-Ring Inlet/Outlet For High Flow and Superior Sealing
- Excellent For Use With Carbureted Or EFI Applications
- Fully Submersible In Tank
- Compatible With 12V To 18.5V Systems For Street Or Race Use
- Compact For Easy Installation On Frame Rails Or Other Tight Areas
- Twin Pump Design Allows The Use Of Both Pumps
- Patent Pending Dual Pump Technology
- Proven Durability Beyond 3000 Hours In Gasoline Or Diesel Fuels
- Weighs Only 5.1 lbs..
- Current Draw At 43 PSI and 13.5 Vdc Is 17.2 Amps
- Provides Everything Needed For A Complete Supply Fuel System
- Billet Fuel Pump PN 12-600 65 gph
- Electric Fuel Pump
- Tumble Polished Billet Look
- Lower Housing Casting Designed For Enhanced Fuel Flow
- Maximum Pressure Is 7 PSI
- Motor Draws 2 Amps Current
- Relay Kit P/N 12-753 And 7 1/2 Amp Fuse Recommended
- Constant Fuel Flow With No Pulsation
- Improved Design For Street/Strip Applications
- Distinctive Red Logo
- Flows 97 gph [Free Flow]
- Flows 71 gph At 4 PSI
- Regulator Is Not Required
- Has Externally Accessible Pressure Relief Valve Max 7 PSI
- 125 GPH Flow Rate
- Constructed Of Lightweight Steel And Aluminum
- 14 PSI Maximum Pressure
- Features 3/8 in. NPT Inlets And Outlets
- Externally Accessible Pressure Relief Valve
- Draws 4 Amps Or Less At Full Load
- Designed For Carbureted Applications Only
- Mounting Bracket/Hardware/Instructions Included
- 110 gph
- 5 Amp Maximum Draw
- Internal Check Valves
- Capable Of PWN (Pulse Width Modulation)
- Utilizes OE Fuel Pump Technology from GM/Chrysler
- High Pressure Relief Setting
- Designed/Engineered To Work w/Most Popular EFI Swap Components
- Made In The USA
- The In-Tank Fuel Pump Module Is A High-Pressure Unit That Flows 350 Liters Per Hour And Is Capable Of Supporting EFI
- Includes A Pre-Calibrated Fuel-Level Sending Unit Designed To Work With The Factory Fuel Gauge For Your Application
- Solves All The Usual Issues Of Converting From Carburetor To EFI
- Gerotor Design For Smooth Operation And Durability
- Flows 125 gph Free Flow
- Flows 110 gph At 7 PSI
- 3/8 in. Npt Inlet/Outlet Fittings
- Black Mil-Spec Nickel Ptfe Hard anodized Billet Base
- Show Quality Chrome 12v Motor
- Profiled Black Powder Coated Mounting Bracket
- Laser Engraved Holley Logo And Inlet/Outlet Markings
- Less Noise Than Traditional Vane Pumps
- 6 1/4 in. Tall
- Compatible With Gasoline Or Alcohol
- Billet Aluminum Construction For Durability and Good Looks
- -8AN O-Ring Inlet/Outlet For High Flow and Superior Sealing
- Excellent For Use With Carbureted Or EFI Applications
- Fully Submersible In-Tank For Space Savings/Less Plumbing
- Compatible With 12V To 18.5V Systems For Street Or Race Use
- Compact For Easy Installation On Frame Rails Or Other Tight Areas
- Proven Durability Beyond 3000 Hours In Gasoline Or Diesel Fuels
- Weighs Only 3.1 lbs..
- Current Draw At 43 PSI and 13.5 Vdc Is 8.6 Amps
- Space Savings and Less Plumbing
- Draws 5 Amps At 15 PSI
- Will Feed Up To 800 Horsepower Throttle Body EFI Units
- Will Feed Up To 700 Horsepower Multipoint Units
- Will Feed Up To 600 Hp Forced Induction Multipoint Units
- Lightweight and Compact
- 3/8 in. Barbed Fittings Included
- Designed For In-Tank Use Only
- Compact To Fit In Existing Hangers
- Incl. Installation Instructions
- Inlet Filter Meets Or Exceeds OE Specs
- Improved Filtration/Durability
- For Carb/EFI Applications
- Perfect Upgrade For Aftermarket Pumps
- Tumble Polished Billet Look
- Lower Housing Casting For Fuel Flow and Quiet Operation
- Maximum Pressure Is 7 PSI
- Motor Draws 2 Amps Current
- 7 1/2 Amp Fuse Recommended
- Constant Fuel Flow With No Pulsation
- Improved Design For Street/Strip Applications
- Distinctive Red Logo
- Flows 97 gph [Free Flow]
- Flows 71 gph At 4 PSI
- Has Externally Accessible Pressure Relief Valve Max 7 PSI
- Rotor/Vane Pump Design Is More Tolerant Of Contaminated Fuels
- 12 Volt Operation
- 1.5-4 PSI Operating Pressure
- 25 Gal/Hr. Flow
- Good For Up To 300 Hp Naturally Aspirated
- Reliable Solid State Design Provides Longer Life
- 9-11.5 psi
- Simple 2 Wire Hookup
- Self-Priming and Regulating
- 12 in. Dry Lift Capable
- Quiet Operation 65Db
- Great For Carb Trucks/Cars/Generators/Agri Equipment
- Also Makes A Great Transfer Pump
- Flows 43 gph At 15 PSI
- Draws 3.5 Amps At 15 PSI
- Will Feed Up To 400 Horsepower Throttle Body EFI Unit
- OE Proven Design
- Lightweight and Compact
- 3/8 in. Barbed Fittings Included
- Rubber Isolator/Mounting Clamps/Electrical Hardware Included
- 190 lph Feeds Up To 500 Horsepower At 48 PSI
- Proven Gerotor Design
- Compact Enough To Fit In Existing Hanger Assemblies
- Complete Kit w/Drop Parts Accessories/Instructions
- Inlet Filter For Improved Filtration/Durability
- 130 PSI While Giving Significant Flow For Forced Induction Apps
- Unlike Other Pumps VR Series Is Built For Continuous Duty
- Billet Aluminum Construction For Durability and Good Looks
- Vr1 Pump Features A 10 An O-Ring Inlet And Outlet
- High Flow and High Pressure With Low Amperage Draw
- Can Be Fully Submerged In The Fuel Cell Or Chassis Mounted
- Maximum Amp Draw Of The Vr1 Is 19 Amps And 38 Amps For The Vr2