Bumper- Rear

• Backup Sensor Cutouts
• Hammer Black Powder Coat Finish
• Satin Black Powder Coat Panel Finish
• Mounts For Cube Lights

See All

• 11-Gauge US Steel Construction
• Retain OEM Receiver Hitch And Wiring
• Pre-Cut Openings To Utilize Factory Sensors
• 100 Pct. Made In The USA

See All

• Aluminum Rear Bumper

See All

• Ambush Series Rear Bumper

See All

• Smitty Bilt Apollo JL/JT Rear Bumper

See All

• Atlas Rear Bumper

See All

• Frame Cap Style Bumper
• Provide The Best Obstacle Clearance And Departure Angle
• Grade-8 Hardware For Easy Installation

See All

• The Best Ground Clearance And Departure Angle
• Angled Facets To Improve Its Ability To Slide Over The Rocks
• Installation Requires Cutting / Trimming
• A Laser-Cut Steel Template Is Provided
• Includes High Clearance Recovery Shackle Tabs

See All

• Integrates The Existing Receiver Hitch
• Back Up Lights
• Back Up Sensor Holes
• Retains Receiver Hitch And Wiring Locations
• Pipe And Formed Treadplate
• Gloss Black Powder Coat

See All

• Combination Pipe And Tread Plate Construction
• Gloss Black Powder Coat
• Back Up Lights Included
• Pre-Drilled Sensor Holes
• Retains OEM Receiver Hitch And Wiring Locations
• MADE IN THE USA

See All

• Blind Spot Mounts
• Backup Sensor Cutouts
• Hammer Black Powder Coat Finish
• Satin Black Powder Coat Panel Finish
• Mounts For Cube Lights

See All

• Backup Sensor Cutouts
• Hammer Black Powder Coat Finish
• Satin Black Powder Coat Panel Finish
• Mounts For Two Cube Lights

See All

• Provides The Highest Ground And Tire Clearance Possible
• Protects The Flares From Trail Hazards
• Full Width
• Integrated Hitch Receiver
• Recovery Shackle Tabs

See All

• Frame Mounted For Strength Without Stress To Body/Bumper
• Single-Action Opens And Closes w/Jeeps Tailgate
• Compatible w/Crawler™ And Bruiser™ Series Rear Bumpers
• Concealed Heavy Duty Pivot w/Tapered Roller Bearings
• SpyderShell™ Armor Coat Finish w/5-Year Warranty

See All

• Stainless Steel
• Weather Resistant
• Pair
• Hardware Included
• Limited 5 Year Warranty

See All

• 10-Stage Variable Valving
• High Pressure Nitrogen Charged
• Protects Vehicle From On And Off-Road Debris
• D-rings Included - 4.75 Ton Capacity
• D-Ring Mounts Welded Inside And Out For Increased Strength
• Black Finish

See All

• Classic Rock Crawling Rear Bumper

See All

• Low-Profile Desert Racing Design
• Two Light Mounts that Fit 3 In. Light Pods
• Fits up to a 37 In. Spare Tire
• Tube And Plate Steel Construction
• Paintable Aluminum Accent Panels
• Retains Full Functionality Of Oem Backup Sensors
• Accommodates Factory Tow Hitch
• Bolt-On Installation

See All

• Crawler Rear Bumper

See All

• 100 Percent Made In Texas USA
• Standard Premium 5-Stage Satin Black Powder-Coat Finish
• Has Recessed Light Pods For 2X Rigid SRM Backup Lights
• Has Recessed Light Pods For QuakeLED QQU451
• Special Order Options Include Tire Carrier /Corner Guard Upgrades

See All

• Tubular w/Sheet Metal Design
• Keeps Bumper Weight To a Minimum
• Provides Superior Strength Over OEM Rear Bumper
• Tall Corners Keep The Lines Of The Vehicle

See All

• Black Powder Coated
• Factory hitch must be removed
• Accommodates OEM Back up Sensors

See All

• Mount Kit Sold Separately
• Popular Diamond Tread Design
• Full Size Tongue Weight of 800 lbs. And 8000 lbs. Trailer Weight
• Downsize and Compact Are 350/3500 lb. Weights
• V5 Tested Certified To SAE J684

See All

• Built In Step Pockets For Easy Bed Access
• OE Sensor Compatible

See All

• Flat Black Powder Coat
• Back Up Sensor Holes
• Retain OEM Receiver Hitch And Wiring Locations
• Pipe And Formed Smooth Plate Steel

See All

• Bumper Meets Rear Flares To Create Convenient Step
• Available With Or Without A Tire Carrier
• Stand Up To 408 Hour Salt Spray Testing /Excellent UVU Protection
• Rear Parking Blind Spot Sensor Compatible
• Maintains Factory Receiver
• Provision To Relocate Backup Camera
• Made In The USA

See All

• Paintable
• Back Up Sensor Holes
• Retain OEM Receiver Hitch And Wiring Locations
• Pipe And Formed Smooth Plate Steel

See All

• Bumper Meets Rear Flares To Create Convenient Step
• Available With Or Without A Tire Carrier
• Stand Up To 408 Hour Salt Spray Testing /Excellent UVU Protection
• Rear Parking Blind Spot Sensor Compatible
• Maintains Factory Receiver
• Provision To Relocate Backup Camera
• Made In The USA

See All

• Made In America And Proudly Built In Texas
• 7-Gauge Steel
• .25 in. Mounting Brackets And Internal Bracketry
• Direct Bolt-On Design
• Sensor Compatible
• Integrated 8 in. Accent LED Light
• 3 in. Cube Light Mounts
• Corner Step
• Integrated Blind Spot
• Bolt-On Steel Step Plates
• Textured Satin Black Powder Coat
• Lifetime Structural Warranty

See All

• Higher Than Factory Ground Clearance
• 3.5 mm Steel Plates w/ 5 mm. Steel Supports
• Micro-Texture Black Powder Caot Finish
• Dual Clevis Mounts for 3/4 in. D-Ring Shackels
• Retains Factory Backup Sensors

See All

• Protects Vehicle From Damage Against Wildlife And Road Debris
• Provides Added Safety To Driver And Vehicle
• Heavy Duty Diamond Plate Steel
• Honeycomb Mesh Protects Grille/Gives Maximum Airflow
• 1.5 in. Headlight Protection Tubes
• 2 in. Full Wraparound Wings Ties Into Bumper
• Provisions For Factory Parking Sensors
• 2 in. Receiver Hitch/Heavy Duty 9500 lbs. Bow Shackle Mounts
• Compatible For Factory Fog Lamps Or LED Post Mount Lights
• Custom Die Cast Riveted Logo Badge
• Mounting Provisions For License Plate
• Hardware Mounting Brackets Included

See All

• Integrated Steps On Either Side Of The Tailgate
• Durable Formed 3/16in. Steel Construction
• Retain OEM Receiver Hitch And Wiring Locations
• 3/4in. D-Ring Recovery Points
• 2 Stage Black Powder Coat

See All

• Satin Black Finish
• Massive Recovery Hooks
• Built-In Jack Lifting Points
• Limited 5 Year Warranty

See All

• Easy To Install!
• Durable; Steel Construction
• Incl. [2] Rough Country Led Cubes
• Integrated Steps For Easy Access To Bed
• Retains Factory Receiver Hitch
• Incl. Backup Sensor Relocators

See All

• 3/16 in. Internal Structure Plating
• 1/8 in. External Steel Plating
• Reinforced Clevis Mounts
• Dimple Died Step Plates

See All

• Identity Jeep Rear Bumper

See All

• iDentity Bumper Components

See All

• Truly Modular Design For Customization
• Optional Shackle Or Non-Shackle Mount End Pods Available
• Avail. Mesh And Trim Ring Inserts w/Integrated Parking Sensors
• Integrated 8 in. Accent Led Lighting w/Preparatory Control Module
• Accommodates w/Factory Hitch And Tow Point
• Allows For Multitude Of Rear Facing Light Options
• Constructed From High Quality Steel
• Made In USA

See All

• Identity Rear Bumper Shackle End Pods

See All

• 10-Stage Variable Valving
• Durable Steel Construction
• Includes 2 Rough Country Led Cubes
• Integrated Steps For Easy Access To Bed
• Retains Factory Receiver Hitch
• Includes Backup Sensor Relocators

See All

• Direct Fit
• Manufactured From 3/16 and 1/4 Cold Roll Steel
• Solid Mount D-Rings Welded On The Inside And Out
• Two Stage Matte Black Finish Powder Coat Finish - 5 Year Limited Warranty
• Smittybilt Advantage Warranty

See All

• M1A2 Modular Rear Bumper For 14-18 Chevy Silverado

See All

• 2 Clevis Mounts That Take 3/4 In. D-Rings
• Includes Paintable Aluminum Inserts
• Utility Steps Located On Each Corner For Easier Bed Access
• Parking Sensors Are Retained
• Gusseted Construction For Strength
• Direct Fit Bolt-On Installation

See All

• OEM Style Steel Rear Bumper

See All

• Mount Kit Included
• 2 In. Diameter Tube Frame
• Optional Class III/IV Hitch Available. Sold Separately
• Retractable License Plate Holder Conceals Receiver Hitch
• Equipped With Mount Points For Optional Auxiliary Lights
• Available For Vehicles With Or Without Backup Sensors
• Bolt-On Installation; No Drilling Required

See All

• Truck Pal; Tailgate Ladder
• Complete Assembly
• Molded Polymer Step Pads
• V5 certified
• Interchangeable Components
• 3 Year Warranty

See All

• Hammer Black Powder Coat Finish
• 10 In. Single Row Light Bar Mounts
• Parking Sensor Cutouts

See All

• Integrates With Existing Receiver Hitch
• Formed Steel Durability
• Gains Lower Steps And Recovery Points
• Stylish And Functional

See All

• Integrates With Existing Receiver Hitch
• Formed Steel Durability
• Gains Lower Steps And Recovery Points
• Stylish And Functional

See All

• Hammer Black Powder Coat Finish
• Satin Black Powder Coat Panel Finish
• Backup Sensor Cutouts
• Mounts For Cube Lights

See All

• Backup Sensor Cutouts
• Hammer Black Powder Coat Finish
• Satin Black Powder Coat Panel Finish
• Mounts For Cube Lights

See All

• Increases Ground Clearance And Angle Of Approach
• Constructed Of 10 Gauge Steel For Strength And Style
• Compatible For Blind Spot Monitors And Parking Sensors
• Accommodate For Oem Hitch And Led Back Up Lights
• Configured To Accept 2 Fm6 Led Flush Mount
• Custom Laser-Cut Westin Logo
• Hardware And Mounting Brackets Included
• Bolt-On Installation - No Drilling Required

See All

• Rear Bumper

See All

• 3/16 Inch Steel Plate Construction
• Bolt On Installation Includes Hardware
• Dual Shackle Plates For D-Rings Tie To Frame Rails
• License Plate Pocket Reuse OEM Lights
• Dual Process Black Powder Coat Finish
• Retain OEM Tow Hitch
• Can Mount TN-5293 Swing Arm Tire Carrier

See All

• 3/16 in. Cold Rolled Steel Plate Construction
• Dual Shackle Plates Tie To Frame Brackets
• Will Allow For TC 5293 Swing Arm
• Stronger Then OEM Bumper
• Dual Process Black Powder Coat Finish
• Easy At Home Installation With Only Hand Tools
• Return OEM Tow Hitch

See All

• Rear Bumper

See All

• Our Rear Bumpers Come With 7/8 in. D-Ring Shackles
• Will Work w/Your Factory Hitch Receiver
• Lights Not Included

See All

• Aggressive Styling
• Integrated Tow Hooks And D-Ring Mounts
• Double Rung Side Step
• Fab Fours Signature Knife Edge Design
• Ease Of Installation
• Includes 16 Gauge Removable Skin
• Sensor Compatible
• 2 Integrated Pod Mounts For Reverse Lights
• Stainless Steel Hardware
• 2 Stage Matte Black Powder Coat
• 11 Gauge Steel Construction
• MADE IN THE USA

See All

• Direct Fit
• 2 And 4-Door Models
• Textured Black
• One-Piece Design
• Robotically Welded For Extreme Durability
• Pre-Cut Vertical Uprights For A Signature Look
• No Hitch
• 5 Year Limited Warranty

See All

• Rear Bumper Kit

See All

• Rear Bumper Light With Fog Light

See All

• 3/16 in. Steel Plate
• Bumper Step For JT-2965
• Bolt-On Design
• Uses Factory Frame Mounting Holes For Extra Support
• Optional Bed Protector JT-5101
• Two-Stage Light Texture Finish In Black
• 3 Year Finish/Limited Lifetime Warranty

See All

• Rear Bumper Step Pad

See All

• Protects Rear Bumper From Loading/Unloading
• Restores Damaged Bumpers And Protects New Bumpers
• No Drill Installation
• Mounts With 3m Tape
• Made In Usa

See All

• Slim Design
• Textured 3 Stage Powdercoat
• Solid Steel Construction
• Light Weight
• Bolt On Installation
• Standard Dv8 Warranty
• Aluminum Vents Can Be Color Keyed To The Jeep

See All

• Easy Bolt-on Installation.
• Aggressive Appearance.
• Incl. [2] Rough Country Led Cubes
• Incl. D-rings
• Retains Factory Receiver Hitch

See All

• Rear Steel Bumper

See All

• Gloss Black
• Allows Oversized Spare Tire
• Welded End Caps
• Limited 5 Year Warranty

See All

• Aggressive Design
• Winch Ready- Will Hold Up To 16.5K Winch (Depends On Vehicle)
• Perfectly Follows The Body Lines
• Side Mounting Slots And Tabs For Various Light Options
• Provides Far More Tire Clearance
• Integrated Shackle Mounts

See All

• With Receiver
• No D-Ring Mounts

See All

• Manufactured From Durable 5/32 Steel And 2x.120 Tubing
• Protects Vehicle From On And Off-Road Debris
• Incl. D-Ring Set
• Satin Black Finish
• Installation Hardware Included

See All

• Hammer Black Powder Coat Finish
• Parking Sensor Cutouts

See All

• Maximize Performance On The Toughest Trails
• Multi-Faceted Bumper Design
• Plate Steel Bumper Construction
• Recessed Back-Up Lamps
• Integrated Hitch Receiver
• Rock Solid Mounting
• Recovery Shackle Tabs

See All

• Multi-Faceted Design
• Recessed Back-Up Lamps
• Works w/Existing Equipment
• Rock Solid Mounting

See All

• Black
• Stamped Steel
• Fits Up To 7/8 in. D-Rings; Not Included
• Efficient Stamping Process Used
• Creates A Product Lighter Than Most Aftermarket Steel Bumpers
• Sturdy 11 Gauge Powder Coated Steel Construction

See All

• 11-Gauge Main Body
• 7-Gauge Bracketry
• Louvered Recesses For Reduced Drag
• Sensor Compatible
• Direct Bolt On Application
• Block Off Plate w/Stainless Hardware For No Lighting Option
• High Clearance Bumper
• Formed To Fit The Contours Of Vehicle
• CNC Laser Cut
• Made In America

See All

• Spartan Rear Bumper

See All

• Full Width Bumper
• Stain Black Finish
• Center Bumper
• Works w/Factory JK Tow Hitch
• 6 Year Limited Warranty

See All

• Easy Access To Factory Tow Hitch
• No Drill Installation
• Black Powder Coated
• Accommodates Factory Park Assist Sensors

See All

• Raised corners for better entry and exit under the most extreme conditions
• Accommodates 3X3 Cube Led Lights
• Integrated 3/4 in. D-Ring Mounts
• Class Iii Receiver Hitch
• Integrated Jack Points
• Perfect Mid Width Design

See All

• Direct Fit
• Two Stage Textured Black Powder Coat Finish
• Dense Zinc Treated Undercoating
• Expertly Robotically Welded
• Bumpers

See All

• New solid D-ring and jack point mount - welded on the inside and out!
• Aggressive design for with raised corners for better entry and exit angles for the most extreme conditions
• UHMW ;ultra-high-molecular-weight polyethylene to provide the ultimate protection for rock crawling
• Aux back up light cut out provided
• 3/16-inch cold rolled steel with two-stage textured matte black finish
• Powder coat finish 5 year limited warranty
• Smittybilt limited lifetime warranty
• Modular design; tire carrier can be added in the future.
• Class III hitch for true towing with towable d-ring

See All

• Direct Fit
• Black Powder Coat
• Dense Zinc Treated Undercoating
• Two Stage Textured Black Powder Coat Finish
• Expertly Robotically Welded
• Bumpers Bolt Directly To Your Vehicle
• Bumper Is 2 in. X .120 in. Wall
• 2 in. Receiver Rated Class III 9;000 LBS.

See All

• Standard Rear Bumper

See All

• Backup Sensor Cutouts
• Hammer Black Powder Coat finish With Satin Black Panels
• Mounts For Cube Lights

See All

• Made In American And Texas Strong USA
• 3/16 in. Heavy Duty Steel Construction
• 1/4 in. Gusseting And Internal Bracketry
• CNC Laser Cut
• Precision Brake Formed
• Welded By Craftsmen Inside And Out
• Direct Bolt On Design
• Includes License Plate Lights
• Light Ports For Led Backup Lights
• Standard Premium 5-Stage Satin Black Powder-Coat Finish

See All

• Made In American And Texas Strong USA
• 3/16 in. Heavy Duty Steel Construction
• 1/4 in. Gusseting And Internal Bracketry
• CNC Laser Cut
• Precision Brake Formed
• Welded By Craftsmen Inside And Out
• Direct Bolt On Design
• Includes License Plate Lights
• Light Ports For Led Backup Lights
• Standard Premium 5-Stage Satin Black Powder-Coat Finish

See All

• Hammer Black Powder Coat Finish
• Satin Black Powder Coat Panel Finish
• Mounts For Two Cube Lights
• Retains OEM Parking Sensors
• Retains OEM Tow Hitch And Trailer Plug
• Retains OEM Blind Spot Modules

See All

• Made In Texas USA
• 3/16 in. Heavy Duty Steel Construction
• 1/4 in. Gusseting And Internal Bracketry
• CNC Laser Cut
• Precision Brake Formed
• Welded By Craftsmen Inside And Out
• Direct Bolt On Design
• Includes License Plate Lights
• Light Ports For Led Backup Lights
• Standard Premium 5-Stage Satin Black Powder-Coat Finish

See All

• Made In American And Texas Strong USA
• 3/16 in. Heavy Duty Steel Construction
• 1/4 in. Gusseting And Internal Bracketry
• CNC Laser Cut
• Precision Brake Formed
• Welded By Craftsmen Inside And Out
• Direct Bolt On Design
• Superior Foot Forward Winch Mount Fits WARN M8000 Or 9.5XP
• Includes License Plate Lights
• Light Ports For Led Backup Lights
• Standard Premium 5-Stage Satin Black Powder-Coat Finish

See All

• Not Vehicle Specific
• 3mm Deep Drawn Formed Steel
• Winch Compatible Up To 12K
• Includes Modular Wings With Light Provisions
• Integrated D-Ring and Lift Points
• Oe Fog Light Provision
• Integrated Overrider With 13 in. Lightbar Provision

See All

• Cold Rolled Brite Steel
• OE Style Steel Step Plate
• Molded Polymer Surface
• Mount Kit Sold Separately
• 3 Year Warranty

See All

• Safely Holds Up To 37 In. Tires
• Innovative Swing-Out System
• Includes 3rd Brake Light Relocation Bracket
• Includes License Plate Relocation Bracket
• Durable Steel Construction

See All

• Made In American And Texas Strong USA
• Schedule 40 Pipe For Center Structure
• 11 Gauge Shell w/1/4 in. Heavy Duty Mounting System
• CNC Laser Cut
• Precision Brake Formed
• Welded By Craftsmen Inside And Out
• Direct Bolt On Design
• Recessed Light Ports For Flush Or Surface Mount Led Cubes
• Mounting Holes For License Plate
• Standard Premium 5-Stage Satin Black Powder-Coat Finish

See All

• Made In America And Proudly Built In Texas
• 11-Gauge Steel
• 1/4 in. Internal Bracketry
• Schedule 40 Pipe
• Direct Bolt-On Design
• Recessed Light Ports For Flush Or Surface Mount Led Cubes
• Sensor Compatible
• Textured Satin Black Powder Coat
• Lifetime Structural Warranty

See All

• Superior Strength And Styling
• Give Your Vehicle That Extra Cool Factor
• Two Front Side Openings Allow Light Options
• Sensor Compatible
• 11 Gauge US Steel

See All

• .120 in. Wall Steel Tube Construction
• Laser Cut Skid Plates/Tabs And Plates
• Direct Fit/No Cutting Or Welding Required
• Stainless Steel Hardware
• Designed To Work With Factory Tow Equipment

See All

• RotoPax Mount

See All

• 3/16-Inch Plate Steel Construction
• Designed To Work With Factory Or Westin Hitches
• Integrated Recovery Shackle Mount Points
• Auxiliary Light Mount Points
• Rock Light Mount Points
• 2 Off-Road Jack Points
• No Drilling Required - Bolt On Installation
• Includes Bumper; Mounting Hardware And Install Instructions

See All

• Bolt-on design for XRC GEN2 bumpers
• Frame pivot point for added strength
• Tuned one-handed opening operation; tuned to factory tailgate
• CB and jack mounts and Roto Pax® gas can holder
• Manufactured from 3/16 in. cold rolled steel
• Two-stage textured matte black finish

See All

• 18-Current Wrangler JL; 2-4 Door
• Adjustable Slant Tire Carrier
• Convertible Rotopax Mount Can Be Installed In Either Straight Or Slant Tire Configurations
• Included Adjustable 3rd Brake Light Bracket
• Retains OE Camera Location And Functionality
• Removable Trail Jack And Aerial Antenna Mount
• Steel Vent Cover
• Roller Bearing Pivot
• Fits Up To 40 in. Tire; With Single-Action Open And Close Feature

See All

• Direct Fit
• 2 And 4-Door Models
• Two Stage Matte Black Textured Powder Coat Finish

See All

• Textured Black
• Incl. XHD Frond Winch Mount Bumper And Double-X Striker Bar
• Incl. Standard Bumper Ends
• Modular Design
• Steel

See All

• Textured Black
• Incl. XHD Frond Winch Mount Bumper And Double-X Striker Bar
• Incl. Standard Bumper Ends
• Modular Design
• Steel

See All

• High strength lightweight design
• Low Profile Winch Mount Improves Air Flow
• Integrated lightweight 10-gauge steel shell 4-gauge steel winch tray provides superior strength at an affordable price
• Features 4.5 x 10 in. winch mount pattern
• Accommodates Most Winches Up To 12000 lbs Capacity

See All